Learning Center

Find the answers to all your flooring questions.

How is Laminate Flooring Made?

Some people prefer to pick their laminate by measuring its durability and toughness. One way to do this is to understand how different laminates are made. The better you understand the way your laminate is built, the better bang you can get for your buck.

laminate flooring

Lamton Laminate – 8mm AC3 – Phoenix Collection / SKU: 15192056

How Laminate Flooring is Made

Direct Pressure Laminate Flooring

DPL is made of 4 layers:

  • Stabilizing Layer: sometimes called the Backing Layer, it is the bottom material that provides strength and stability to the laminate board.
  • Core Layer: sometimes called the core board, it is the central layer of a laminate floor board that is the structural element supporting the weight and stresses of foot traffic. It is typically made with high-density fiberboard (HDF), but sometimes is made from particle board or medium-density fiberboard (MDF).
  • Decorative Layer: the name given to the photo rendering of the design which is made to mimic the surface of a natural material, such as a hardwood species.
  • Wear Layer: a resin-based coating designed to resist abrasion and typically made up of several coats of melamine or aluminum oxide (2nd only to diamonds in hardness) which protects the floor from stains, fading and wear.

Sheets of laminate flooring are made by fusing these four layers together at over 600 pounds of pressure per inch at temperatures of around 400 degrees Fahrenheit. In the direct-pressure laminate process the decorative covering layer and stabilizing layer are pressed together onto the core layer.

Composition of a direct-pressure laminate floor (DPL)

  • Overlay (wear layer)
  • Decorative paper
  • Core layer
  • Stabilizing layer

High Pressure Laminate Flooring

HPL is made of 5 layers instead of 4 and creates a more durable laminate than direct pressure can because the backing and top wear layers are treated separately and then fused directly onto the core, creating a very strong floor suitable for very heavy traffic. It consists of the same four layers as in Direct Pressure Laminate, with the fifth layer being a special high-strength paper.

In the high-pressure laminate process, the decorative paper and overlay are pressed onto a special high-strength paper first. Only in a second stage is this so-called high-pressure laminate glued to the core layer.

Composition of a HPL Laminate floor:

  • HPL layer
  • Core layer
  • Stabilizing layer

The resulting laminate flooring products can come in thicknesses varying from approximately 6mm to 14mm, the thicker the laminate floors, the more durable. HPL flooring is generally more expensive than DPL flooring.

The Final Steps in the Process

Once the sheets of laminate flooring are made using either of these two methods, surface textures are then imprinted onto the sheets. The sheets are then cut into planks of varying lengths or into square tiles. Specialized machinery is then used to cut the tongue and groove locking system into the edges.

(6) Comments

  1. The question is not if there is but how the company is handling the situation. Theyy should run to an underground drainage system or made to at
    leadt run away from the foundation by way of an extension or splash block.
    t always common knowledge and apparent to a homeowner.

  2. Looking for a product to be installed over electric radient heat that would be used in the bathroom? Could be marble in appearance or tile look in a color of slate or in the lite blue mix. Thank you

  3. Pingback: Top 5 Green Flooring Options for Your Home | Blue Planet Green Living

  4. ibrahim saifuddin sakarwala

    thankyou for the informative web site hope that i can set up the project…….

  5. i am doing a sci. fair project on floor laminate and tile. i need information and the person who stated it. can some tof the information be on bacteria. if you answer make it quick sci. fair is coming up and i need your help.
    thank you
    REGAN DAVIS

Comments are closed.