Wire Brushed White Oak Matte VENT SURFACE MT 4x10
- SURFACE MOUNT VENTS (Drop-in Vents) easily drop into the duct opening, and with a rounded surface overlap, covers any rough edges in the floor. Available with or without metal dampers to moderate and direct air flow.
This product is custom made and specially made to order. The shipping lead time on this product is reflective of production time.
Color and grain matching - It is important to consider color and grain matching of any molding and hardwood flooring that will be installed adjacent to one another. Because hardwood flooring and moldings are products of nature, they are susceptible to variations in grain and wood color. Floors with color variance will have moldings that are blended to the best of our ability, but some variance is normal and should be expected.These natural variations add variety and natural beauty to the overall look of your floor. However, pre-selecting flooring and moldings that will be installed adjacent to one another will enhance this beauty. Just prior to installation, the installer should sort through and set aside several pieces of flooring that most accurately match the required moldings. Following this simple, but often overlooked guideline, will provide a pleasing and trouble-free finish on every job.
Our 30 Day Money Back Guarantee only applies to regular BuildDirect products. This means that our 30 Day Money Back Guarantee does not extend to custom made and special orders.