✔ EASY INSTALLATION - 3 Simple Step Process (1. Install Underlayment, 2. Roll Out Electric Radiant Heat Film & 3. Install final floor covering)
✔ MINIMAL THICKNESS PROFILE - Ultra-thin (less than .016") heated panels keeps same floor heights through room transitions
✔ PROVIDES UNIFORM HEAT - Your floor is heated uniformly with no gaps and the radiant heat is dispersed evenly through the room
✔ QUIETS YOUR FLOOR - Used in combination with QuietWalk underlayment, you achieve a superior sound rating: IIC 71 & STC 67
✔ SAFETY CERTIFIED - ETL in compliance with UL Standards for radiant flooring in the USA and Canada
✔ COST LESS TO OPERATE - Even heat distribution allows the QuietWarmth systems to cycle quicker resulting in less energy consumption
✔ MAINTENANCE FREE - Crafted to not completely shut down if the system should ever become compromised or damaged
✔ MAT SIZE: 3 ft x 10 ft - 120V
A gentle electric radiant heat system designed specifically for dry installation under floating wood and laminate floors. A low profile, line voltage system, it features gradual warmth from low wattage resistance heating of ultra-thin, flexible radiant heat film.
Installed easily over a subfloor or over an acoustic/insulating underlayment as part of the overall floor assembly, it uses just 12 watts per square foot to gently raise the temperature of the floor, conforming to the warranty requirements of many floating floors. The system, which sports an impressive 99% efficiency, includes temperature limiting properties so the film does not overheat.
APPROVED FLOOR COVERING MATERIALS
- All Floating Floors
- Floating Tiles
- Laminate Flooring
- Engineered Wood
- Luxury Vinyl Flooring (4mm or thicker)
- Cork and Bamboo
- Refer to Floor Covering Manufacturer's specifications for compatibility of their product over any radiant heat before installation.
Its available in four convenient rollout mat sizes that will accommodate most any layout. Each mat has wires pre-attached for ease of installation.
- Uses an highly-efficient conductive ink technology
- Consumes up to 50% less power than traditional wired systems
- Easy to install: roll out, cut length to fit if needed and run pre-attached wires to a wall thermostat
- No mortar and no mess
- Conforms to many floating floor manufacturers requirements
- Disperses an evenly consistent heat throughout the entire floor
Thermostat required, sold separately. The amperage limit of a single Quiet Warmth Underfloor Heating thermostat is 15 amps. You can combine as many mats as you want to a single thermostat as long as the amperage load does not exceed 15 amps. Amperage will be listed on each mat. 15 amps equates to:
1 thermostat can accommodate up to 150 sq. ft. of 120V underfloor heating.
1 thermostat can accommodate up to 300 sq. ft. of 240V underfloor heating.
Optional Power Module available for larger installations, sold separately. For larger installations such as basements, we suggest “zoning” your space and using a second thermostat. Amperage will be listed on each mat. Power modules can also double the thermostat limit, but again as long as the amperage load does not exceed 15 amps:
1 thermostat combined with a power module can accommodate up to 300 sq. ft. of 120V underfloor heating.
1 thermostat combined with a power module can accommodate up to 600 sq. ft. of 240V underfloor heating.