Learning Center

Find the answers to your home improvement questions.

How to Paint a Vinyl Floor

Painting Vinyl Floor

While vinyl is a popular flooring option for many rooms in a house, its color can fade because of exposure to sun or normal wear. Fortunately, painting vinyl is a budget-friendly way of bringing your floor back to life. Whether you’re interested in changing the look of your vinyl floor or making your floor look like new, this helpful guide will walk you through the important information you need to know about painting a vinyl floor.

Five Steps to Take

Although the steps to paint your vinyl floor seem tedious, they’re important to follow. If you skip a step in the interest of saving time, you could end up with paint that chips or flakes as soon as you start walking on the floor, which means you’ll have to repeat the entire process again. However, if you follow these important steps properly, you’ll enjoy a new floor color that has a smooth and clean finish.

1. Clean the Floor Thoroughly

If your floor is dirty, any paint you apply will adhere to the dirt and not to your floor. This will cause a splotchy and uneven finish. Therefore, the first step is to make sure the floor is thoroughly clean. Fill a bucket with warm water and an all-purpose cleaner. Dip a cloth or sponge in the cleaning solution, and use it to wipe down your floor to remove dirt, grime, or wax buildup. Once you’re done cleaning, make sure you take the time to let your floor dry completely.

2. Fill Holes and Cracks

Once your floor is clean and dry, the next step of the process is to inspect it for any holes or cracks. If you discover any imperfections on the floor, it’s important to use a putty knife and wood filler to patch them. Although you might not notice them with the old color, new paint could make the damage more visible. After the wood filler has dried, use a medium-grit sandpaper to smooth the area. Then use a vacuum to remove any debris on the floor and a damp microfiber cloth to wipe up any remaining dust.

3. Degloss

Now you’re ready to remove the gloss on your vinyl floor. This is a key step in the process because it makes it easier for the new paint to adhere. Liquid deglosser is a powerful chemical, so make sure you take proper precautions when using it. You must wear eye protection and rubber gloves. Additionally, it’s important to ventilate the room with as much fresh air as possible. Use a clean cloth to apply the liquid deglosser to your vinyl floor, and then allow it to dry.

As you’re applying the liquid deglosser, be sure you begin at the wall or corner that’s opposite to the room entrance and work your way backwards. This will help you make sure you don’t literally paint yourself into a corner with no way out until the floor dries.

4. Prepare and Prime

Once the liquid deglosser has dried completely, you’re ready to start preparing the room for paint. Either remove or apply blue painter’s tape to the baseboards along the wall to protect them from your floor paint. Keep in mind that even though you’ve used painter’s tape, you still need to go easy on the amount of paint used near the trim.

Use a small paintbrush to apply a 2- to 3-inch wide strip of primer next to the wall or baseboard. You can then use a larger brush or roller to apply a thin coat of primer to the rest of the floor. After the first coat of primer has dried, apply a second coat. Allow it time to dry as well.

5. Paint

Painting Vinyl Floor

Now you’re ready to apply your new coat of paint. As with applying the primer, use a small brush to cut in a band of floor paint at the wall or baseboard. Then use a large brush or roller to paint the remaining area of the floor. Allow to dry completely before applying a light second coat.

One nice aspect about painting your vinyl floor is that you can add a new pattern or design with a different color. If you decide to do this, wait until both coats of your base color have dried, and then apply the painter’s tape for your design. After you’ve taped your design, simply apply the other color where you want it, and allow it to dry. You’ll likely need to add a second coat of this paint as well.

Once the floor is dry enough to walk on, you can remove the painter’s tape, reattach the baseboards if needed, and enjoy the beauty of your vinyl floor with its new paint.

What Accessories Will you Need?

To make your painting job as easy as possible, make sure you have the following accessories on hand before you begin:

  • Bucket
  • Sponge or cloth
  • All-purpose cleaner
  • Putty knife
  • Wood filler
  • Medium-grit sandpaper
  • Microfiber cloth
  • Vacuum cleaner
  • Eye protection
  • Rubber gloves
  • Liquid deglosser
  • Blue painter’s tape
  • Small paintbrush
  • Primer
  • Large paintbrush or roller
  • Floor paint

What Kind of Paint Should You Use?

It’s good to know some basics about what you’ll be working with before you begin painting your vinyl floor. Vinyl is a plastic material, and most paints aren’t formulated to adhere to something as smooth as plastic. As a result, you’ll need to purchase a paint specially designed for use on vinyl.

Paints that are formulated to adhere to vinyl are made with 100 percent acrylic or blends of urethane and acrylic resin. One quick and easy way to know if the color you’re interested in using will work on a vinyl floor is to look for it in exterior paint. This is because many paint companies will create these blends for exterior use on vinyl siding. You can also look for paint that’s labeled as floor or porch paint.

When you’re ready to give your vinyl floor a refreshed look, you can do so with paint. Use the information in this guide to make sure you follow the proper steps so you can enjoy your new floor color for years to come.

browse all vinyl flooring

Resources:

https://www.builddirect.com/blog/transform-a-room-with-painted-floors/

https://modernize.com/home-ideas/8553/paint-vinyl-floors

https://homeguides.sfgate.com/paint-vinyl-floors-stay-painted-27855.html

https://www.hunker.com/12000341/will-paint-adhere-to-vinyl

Leave a Reply

Your email address will not be published. Required fields are marked *

You can use these HTML tags and attributes <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Notify me of followup comments via e-mail. You can also subscribe without commenting.