Laying Laminate Flooring Over Ceramic Tiles
|
|
Time to read 2 min
|
|
Time to read 2 min
Many homeowners now wish to replace their old ceramic tile with laminate flooring. Laminate flooring over ceramic tiles is a common choice, especially when the tile is dingy and outdated. Here’s how you make the switch.
Wood laminate flooring has grown exponentially in popularity over the last few years, for several reasons. It provides the warm look of hardwood flooring at a fraction of the cost. Laminate flooring is easy on the feet, and provides a soft cushioning effect while walking. 12mm laminate includes a 2mm foam pad for comfort. The factory finish of laminate flooring is more durable than just about any finish a hardwood flooring refinisher can put on a hardwood floor at a job site.
Fortunately, the answer to the question is yes.
There are many concerns about placing laminate over other flooring, so the question is valid. Removing a ceramic tile floor is hard work. Chipping away old tiles and mortar is extremely time consuming and labor intensive. If a laminate can be placed over a ceramic tile, the labor, and cost, of the installation is decreased dramatically.
Many laminate manufacturers specifically indicate that you can install their product over ceramic tile. Since tile is a durable substrate, there is little risk of deterioration when another flooring is placed over it. There are a few precautions though.
First, the tile should be in good shape, level and free of depressions before installing laminate over top. As with any flooring surface, if there are major depressions and extensive cracking, the issue may be with the subflooring. If your flooring has such depressions, it may be a good idea to determine the cause, and have a professional inspect the flooring if needed.
Often, a visual inspection of the subfloor from the basement will indicate whether a problem exists. However, minor cracks, not due to a defective sub floor; they can simply be filled with epoxy.
Fourth, remember that since you are not removing the tile, there may be a slight height differential between the newly laminated room and an adjoining room, if the adjoining room was level with the tiled area. This usually doesn’t create a problem for most people.
Provided the sub flooring is in good condition, the tile is clean, dry and the grout joints are level with the tile, you are now ready to install your laminate flooring. Your moisture barrier will go directly over the tile, which is why the flooring must be dry when beginning the installation.
Now all you have to do is decide which laminate floor to choose!