How is Laminate Flooring Made?
|
|
Time to read 2 min
|
|
Time to read 2 min
Some people prefer to pick their laminate by measuring its durability and toughness. One way to do this is to understand how different laminates are made. The better you understand the way your laminate is built, the better bang you can get for your buck.
DPL is made of 4 layers:
Sheets of laminate flooring are made by fusing these four layers together at over 600 pounds of pressure per inch at temperatures of around 400 degrees Fahrenheit. In the direct-pressure laminate process the decorative covering layer and stabilizing layer are pressed together onto the core layer.
Composition of a direct-pressure laminate floor (DPL)
HPL is made of 5 layers instead of 4 and creates a more durable laminate than direct pressure can because the backing and top wear layers are treated separately and then fused directly onto the core, creating a very strong floor suitable for very heavy traffic. It consists of the same four layers as in Direct Pressure Laminate, with the fifth layer being a special high-strength paper.
In the high-pressure laminate process, the decorative paper and overlay are pressed onto a special high-strength paper first. Only in a second stage is this so-called high-pressure laminate glued to the core layer.
Composition of a HPL Laminate floor:
The resulting laminate flooring products can come in thicknesses varying from approximately 6mm to 14mm, the thicker the laminate floors, the more durable. HPL flooring is generally more expensive than DPL flooring.
Once the sheets of laminate flooring are made using either of these two methods, surface textures are then imprinted onto the sheets. The sheets are then cut into planks of varying lengths or into square tiles. Specialized machinery is then used to cut the tongue and groove locking system into the edges.